NETGEAR ME103 User Manual page 21

Wireless Access Point User Guide
The default password is password
It is recommended that this be changed, using this screen.
Data - Change Password Screen
Current Password
Set Password
Repeat New
Password
Auto Logout
You will be prompted for the password when you connect, as shown below.
•
Enter admin for the User Name.
•
Enter the Wireless Access Point's password, as set on the Change Password screen above.
Enter the current password here
Enter the new password here
Re-enter the new password in this field.
If set to Enable, the login will expire after the connection has been
idle for a new minutes. You will then need to re-enter the
password.
If set to Disable, the connection will not time-out, and you need to
logout manually, using the Logout option on the menu.
Using the default value of Enable is recommended.
Figure 14: Password Dialog
18