Ip Settings Screen - NETGEAR ME103 User Manual

If you can't connect:
It is likely that your PC's IP address is incompatible with Wireless Access Point's
IP address. This can happen if your LAN does not have a DHCP Server.
It this case, you must change your PC's IP address to match the Wireless Access
Point. See Appendix C - Windows TCP/IP for details for this procedure.
Information Screen
When you first connect, you will see the Information screen. This displays the current settings
and status of the Wireless Access Point. No data can be input on this screen.
For further details of this screen, refer to Information Screen in Chapter 5.

IP Settings Screen

The settings on this screen must be suitable for your existing network.
Click IP Settings on the menu to view a screen like the following.
Figure 7: Information Screen
Setup
11