Reset Access Point - NETGEAR ME103 User Manual

Restore saved settings
from a file
Revert to factory
default settings

Reset Access Point

This screen allows you to Restart (Reboot) the Wireless Access Point.
To reach this screen, select Reset Access Point in the Maintenance section of the menu.
If you have a previously-saved configuration file, you can use
this to restore those settings by uploading the file.
1. Click the Browse button and navigate to the location of the
configuration file.
2. Select the upgrade file. Its name will appear in the File field.
3. Click the Restore button to commence the upload.
4. The Wireless Access Point will need to restart, and will be
unavailable during the restart. All exiting connections will be
broken.
Use this to set the Wireless Access Point back to its factory
default settings.
•
Click "Erase" to start the procedure.
•
The Wireless Access Point will need to restart, and will be
unavailable during the restart. All exiting connections will be
broken.
Figure 20: Reset Access Point
Advanced Configuration
29