NETGEAR ME103 User Manual page 37

Wireless Access Point User Guide
Bit error rate: 1E-5 @ -83dBm
WEP 64 bit and 128 bit security supported
Indoors
Outdoors
Management Web based configuration
Functionality
Firmware
Upgrade
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
30M(100ft.) @ 11Mbps
50M(165ft.) @ 5.5Mbps
70M(230ft.) @ 2Mbps
91M(300ft.) @ 1Mbps
152M(500ft.) @ 11Mbps
270M(885ft.) @ 5.5Mbps
396M(1300ft.) @ 2 Mbps
457M(1500ft.) @ 1 Mbps
Fully compatible with the IEEE 802.11b Standard
Network Mode: Infrastructure
Wireless Mac authentication
Enable/Disable SSID broadcast
Preamble Type
RTS Threshold
Fragmentation Threshold
Open system and shared key authentication support
64 bit (40 bit) & 128 bit WEP encryption
Adjustable Transmit power
System log
Attached station list
Automatic Channel Selections
802.1x support
Configuration file Backup
DHCP Client
WINS client
Radius client
NetBIOS name resolution
EAP-MD5 support
EAP-TLS support
HTTP, TFTP and proprietary network protocol download
34