NETGEAR ME103 User Manual page 49

Wireless Access Point User Guide
Figure 35: TCP/IP Properties (Windows XP)
5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows settings.
Restart your PC to ensure it obtains an IP Address from the Wireless Access Point.
Using a fixed IP Address ("Use the following IP Address")
•
If your PC is already configured, do NOT change the settings on the screen shown in
Figure 35 above, unless advised to do so by your network administrator.
•
You can enter the Wireless Access Point's IP address in the Default gateway field and
click OK. Your LAN administrator can advise you of the IP Address they assigned to the
Wireless Access Point.
•
If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
46