NETGEAR ME103 User Manual page 44

3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify
an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this method is recommended. By default, the
Wireless Access Point will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the Wireless Access Point.
Specify an IP Address
If your PC is already configured, check with your network administrator before making the
following changes.
1. The Default Gateway must be set to the IP address of the Wireless Access Point. To set
this:
•
Click the Advanced button on the screen above.
•
On the following screen, click the Add button in the Gateways panel, and enter the
Wireless Access Point's IP address, as shown in Figure 30 below.
•
If necessary, use the Up button to make the Wireless Access Point the first entry in
the Gateways list.
Figure 29: Windows NT4.0 - IP Address
Appendix C - Specifications
41