NETGEAR ME103 User Manual page 25

Wireless Access Point User Guide
Firmware Version
Current IP Settings
IP Address
Subnet Mask
Gateway
DHCP Client
Wireless Settings
Wireless Network
Name (SSID)
Channel/Frequency
Mode
Security Settings
Authentication
Encryption
The version of the firmware currently installed.
The IP Address of the Wireless Access Point.
The Network Mask (Subnet Mask) for the IP Address above.
The Network Mask (Subnet Mask) for the IP Address above.
This indicates whether the current IP address was obtained from a
DHCP Server on your network.
It will display "Enabled" or "Disabled".
The current SSID.
The Channel currently in use is displayed.
The current operational mode is displayed.
This displays the current Authentication setting.
The current Encryption setting is displayed.
22