NETGEAR ME103 User Manual page 19

Wireless Access Point User Guide
SSID Broadcast
Wireless Network Name
(SSID) Broadcast
Security Settings - 802.1x Mode
Figure 12: Security Settings - 802.1x Mode
Data - Security Screen (non 802.1x Mode)
Data Encryption
Enable this if you wish to use WEP.
Enable
•
•
Authentication Normally, you can leave this at "Automatic", so that Wireless
Type Stations can use either method ("Open System" or "Shared Key".).
If you wish to use a particular method, select the appropriate value -
"Open System" or "Shared Key". All Wireless stations must then be
set to use the same method.
Select the desired option:
Encryption
•
•
If set to Enable, the Wireless Access Point will broadcast its
SSID, allowing Wireless Stations which have a "null" (blank)
SSID to adopt the correct SSID. If set to Disable, the SSIS is
not broadcast.
You must provide at least one Key value.
All Wireless Stations must have the same settings.
64 Bit Encryption
128 Bit Encryption
16