Omron FH-1 series User Manual page 146

4 Setting the Controller
Setting Date/Time with Remote Operation Tool
1
In the Main window of the Remote operation tool, click [System settings] - [Other] - [Datetime
setting] from [Tool] menu.
The setting screen on the Sensor Controller is displayed on the remote operation PC.
Additional Information
For the "Controller Date/Time", the date and time of the Sensor Controller is displayed at the
time of opening the screen.
2
Set the current date and time.
Set item
Controller Date/
Time
3
Click [Date/Time setting].
The date and time are set to the Sensor Controller.
4 - 48
Set value [Factory default]
Set the current date and time.
Set a specified date and time.
Description
Select to set the date and time of the PC run-
ning the remote operation tool.
Select to set the specified date and time.
Vision System FH/FHV/FZ5 Series User's Manual (Z365)