Flow Of Application - Omron FH-1 series User Manual

1-2

Flow of Application

The following table shows the flow for using the FH/FHV/FZ5.
Procedure
Preparations
Vision System FH/FHV/FZ5 Series User's Manual (Z365)
Description
Installation and Wiring
↓
Turning ON Power
↓
Language Selection in Dialog Box (only when
the Sensor Controller is started for the first time)
↓
Main Window (Layout 0) Display
↓
Camera Adjustments (Display the settings dia-
log box for a Camera Image Input processing
item.)
↓
Select [Tool] − [System settings], and then
under [Startup setting], set the settings for
[Basic], [Communication], and [Operation
mode].
↓
Click the [Data save] button, and then select
[Function] − [System restart].
↓
Select [Tool] − [System settings], and then set
the settings for [Camera], [Communication] and
[Other].
↓
Click the [Data save] button, and then select
[Function] − [System restart].
Reference
Vision System FH/FZ5 Series Hardware
Setup Manual (Cat. No. Z366)
FH Instruction Manual
FZ5 Instruction Manual
FHV Series Smart Camera Setup Manual
(Z408)
FHV Instruction Manual
Vision System FH/FZ5 Series Hardware
Setup Manual (Cat. No. Z366)
FH Instruction Manual
FZ5 Instruction Manual
FHV Series Smart Camera Setup Manual
(Z408)
FHV Instruction Manual
Refer to 4-1 Selecting Language [Startup Set-
.
tings] on page 4-2
Refer to 8-2 Adjustment Windows and Run
.
Windows on page 8-11
Refer to 3-1 Preparing the Controller and
.
Cameras on page 3-2
Refer to Section 4 Setting the Controller on
.
page 4-1
Refer to 3-6 Saving Settings before Turning
OFF the Power and Restarting on page 3-34
Refer to Section 4 Setting the Controller on
.
page 4-1
Refer to 3-6 Saving Settings before Turning
OFF the Power and Restarting on page 3-34
1 Overview
1
.
.
1 - 7