Using External Storage Devices; Shared Folder On A Computer Connected To The Network - Omron FH-1 series User Manual

9 Saving/Loading Data
9-1-3

Using External Storage Devices

Use the following procedure to remove the external storage device.
This procedures are available in FH series/FZ5-800/1100/1200 series only.
1
In the Main Window, select [System information] from the [Function] menu.
The system information is displayed.
2
Click [Drive information].
Each drive information is displayed.
If an external storage device is inserted, the [Eject] button is displayed.
3
To remove the USB memory device, click the [Eject] button.
• When the USB Memory Can Be Removed
If the removal failed, wait until the external storage device is no longer being accessed and
then try removing the device again.
Important
Never try to remove the external storage device while the external storage is being accessed. A
critical failure may occur.
9-1-4

Shared Folder on a Computer Connected to the Network

You can setup a network drive in the system settings. This allows the Sensor Controller to handle the
hard drive on a computer that is connected to the local area network as an external storage device.
Refer to 4-13 Setting Network Drive [Network Drive Setting] on page 4-53.
9 - 6
Vision System FH/FHV/FZ5 Series User's Manual (Z365)