Communication Modes; Overview; Digitally Enhanced (De) Mode Communication; Figure 5 - De Mode Value Scaling - Honeywell SmartLine STT700 HART User Manual

2.1 Overview

The STT700 SmartLine Temperature Transmitter can be configured for operation with Honeywell's
Digitally Enhanced (DE) communication protocol and HART version 7 communication. This manual
addresses the processes to configure and calibrate a transmitter for DE and HART communication.

2.2 Digitally Enhanced (DE) Mode Communication

Although it is unnecessary to put a control loop in manual mode before communicating
with a transmitter operating in DE mode, caution is required if there is potential for error in
identifying the operating mode.
In DE mode, the PV is available for monitoring and control purposes.
Much of the operation in the Digitally Enhanced (DE) mode is similar to that of analog operation. The
essential characteristics of DE mode operation are shown in Figure 5.
As indicated at the right of Figure 5, output values of process variables, as well as communications are
transferred to a receiving device digitally. The digital coding is Honeywell proprietary, which requires
the use of DE-capable Honeywell control equipment.
The use of DE mode offers several advantages:

Process Safety: Unlike analog mode, communications devices do not bump the PV value.

Accuracy: Requires less maintenance.

Digital communication: Relatively immune to small variations in circuit resistance or supply
voltage.

Facilitates Maintenance Tasks: Honeywell control systems include operating displays that
enable direct communication with transmitters operating in DE mode.
Revision 1

2 Communication Modes

Figure 5 – DE Mode Value Scaling
STT700 Series HART/DE Option User's Manual
Page 13