Step - HARVEST H1364XT Assembly Manual

Step 42

Now, go through the carriage and insert 1/4" grease zerks into all bushing. (See pictures below)
Fig. 42.1 Fig. 42.2
Fig. 42.3
Step 43
(Hydraulic Hose Assembly)
First remove the plug from the top or the bore end of the cylinders. Identify the velocity fuse. Install velocity
fuse into both cylinder as shown in fig. 43.1. Next, install the "T" fitting on one cylinder and the 90 degree
elbow on the other. Connect the two fittings together with the short hydraulic hose. Next, connect the long
hose end to the other end of the "T" fitting. The cylinders should be assembled as shown in Fig. 43.2.
Fig. 43.1 Fig. 43.2
H13XT Assembly Manual Page 29 of 33