HARVEST H1364XT Assembly Manual page 16

Step 22
Locate the 51 foot 3/8 cables. Attach it to the lower eyebolt located in the middle of the first tube. Attach using
the same process specified in step 21. Pull cable out to the side cable supports and through the 3/8" cable
clamp. When the cable is through the cable clamp, continue pulling the cable to the quick link located on the
rd
joint on the end of the 3 tube. (This will be on the same quick link for a H1364xt) Secure using (2) 3/8" cable
clamps. Repeat on opposite side of the auger. If assembling an H1364XT skip Step 24.
Fig. 22.1 Fig. 22.2
Fig. 22.3
H13XT Assembly Manual Page 16 of 33