HARVEST H1364XT Assembly Manual page 12

Step 16
Locate the PTO support bracket & mount it to the infeed housing as shown in fig. 16.1 using (4) 3/8" x 3/4"
flange bolts & flange nuts. Attach the PTO support chain to the bracket as shown using a 3/8" x 1" flange bolt
& flange nut.
Step 17
Locate the jack and slide it onto the jack mount tube located on the side of the tongue. Secure jack with pin.
H13XT Assembly Manual
Fig. 16.1
Fig. 17.1
Page 12 of 33