Step 44
Locate the brass breathers. Install both brass breather on the lower or rod end of the cylinders. Once the brass
breathers are installed tighten breather.
Fig. 44.1
Step 45
(Swing Tube & Hopper Installation)
Install the swing hopper knuckle (30439) on to the swing tube gearbox. Next, install the swing hopper swivel
ring on the discharge head of the swing tube. Install using (2) 1/2" x 2" carriage bolts, spacer bushings (13262),
& 1/2" lock nuts. Be sure the bushing fits inside of hole in discharge head.
Fig. 45.1
Fig. 45.2
H13XT Assembly Manual
Page 30 of 33