Advertisement
The Displayed Image Settings dialog will open. This dialog is used to affect the appearance of the
images displayed in the DataMan Setup Tool only. It does not affect the resolution or file format of
images that are buffered or transferred via FTP. The purpose of sending lower resolution images is
to reduce the time taken to send images to the software so that read speed can be increased; this
will be demonstrated later in the lab. When the software is not connected to the reader, images are
not transferred to the software so it makes no difference.
At the bottom of this dialog (Fig. 74) are two checkboxes; one enables the Transfer and Display
Images (to the software) and the other enables Transfer All Images. This means that even
images with no code in them will be transferred and by default this is unchecked. For this lab check
this box.
Fig. 74 - Displayed Image Settings
46
Advertisement
