Advertisement
Data Validation
Introduction:
In addition to simply reading codes the DataMan readers are also capable of validating that the
correct string is read or that the code contains a specified string, or that the code meets a validation
standard. In this lab you will learn about how to use match string validation, pattern match validation
and what happens when a code is not compliant with a validation standard.
Start:
So that whatever settings you have changed to this point do not affect what you want to accomplish
in this lab you need to reset the configuration to a default state. To do this click on the System menu
in the ribbon and then click on the Reset Configuration hotkey (Fig. 50). Confirm that you want to
reset the configuration when prompted. The reset will take a couple of seconds to complete.
Fig. 50 - Reset Configuration
When the reset is finished placed the Ace of Clubs in the field of view using the aimer LED's for
positioning. From the Tune menu of the Quick Setup pane click on both the Optimize Brightness
and the Optimize Focus buttons on the left side of the tune menu. Trigger the reader to read the
code; you should see something like the image below (Fig. 51).
Fig, 51 - Ace Of Clubs
30
Advertisement
