Advertisement
Again on the Tune menu in the Quick Setup pane you can see the current Trigger Type (Fig. 29).
By default it should be Single (external); if it is not, set it to Single (external).
Fig. 29 - Trigger Type
Open the Symbology Settings dialog (Symbology Settings hotkey on the Settings menu) as you did
in the second lab and select the General tab. Verify that the Ace of Hearts can only be read when
the Code 128 checkbox is checked by unchecking it and triggering the reader. Recheck the box and
trigger the reader again. Next click on the down arrow at the bottom of the Symbology Settings
hotkey on the Settings menu to expose the list of code symbologies and click on Code 128 (Fig. 30).
This will open another dialog that has additional settings relevant to this symbology.
Fig. 30 - Symbology Specific Settings
17
Advertisement
