Danfoss VLT HVAC Basic Drive FC 101 Quick Manual page 28

Quick Guide
1 1
Parameter
6-11 Terminal 53 High Voltage
6-12 Terminal 53 Low Current
6-13 Terminal 53 High Current
6-19 Terminal 53 mode
Table 1.21 Open-loop Applications Set-up
26
Quick Guide
Option
0–10 V
0–20 mA
0–20 mA
[0] Current
[1] Voltage
Danfoss A/S © Rev. 2014-01-22 All rights reserved.
Default Function
10 V Enter the voltage that corresponds to the
high reference value.
4 Enter the current that corresponds to the low
reference value.
20 Enter the current that corresponds to the high
reference value.
1 Select if terminal 53 is used for current or
voltage input.
MG18A522