Section 4 New Function Introduction - Icom NXDN IC-F5400D SERIES Product Manual

SECTION 4 NEW FUNCTION INTRODUCTION

The new functions are included in the main firmware revision 1.6 or later.
®
• Bluetooth
function
®
A third party Bluetooth
or 3M™ PELTOR™ WS™ Alert XP)* can be used for wireless headset operation. This allows you a flexible
installation style, and will not restrict operator's activity caused by the connection cable and its length.
The adopted Bluetooth
compatible profile are as shown in the table below.
*Only PTT switch action is checked. Icom does not guarantee all functions and performance of the
®
Bluetooth headset.
HFP (Hands-Free Profile)
HSP (Headset Profile)
SPP (Serial Port Profile)
• Active Noise Cancelling function
The Active Noise Cancelling function, which is already used in Icom marine transceivers, can suppress
background noise. By using this function, you can transmit clear voice even in a noisy environment, such as
in a downtown area, or near a high traffic main road. The function can also be activated while receiving a call.
The suppression level of the Active Noise Cancelling function can be set to one of three levels. Up to 30%*
of noise for transmit audio, and up to 90%* of noise for receive audio will be suppressed.
*Theoretical value.
Background noise
headset (3M™ PELTOR™ WS™ Headset XP, 3M™ PELTOR™ WS™ ProTac XP,
®
is compatible with Class 1 and Bluetooth
Table 4-1. Compatible profile
Profile
Used when transmitting/receiving a signal, hands
free.
Used with a connected headset.
Used when connecting two devices using a virtual
serial port. (Used for programming the transceiver
without a programming cable.)
Voice
Active Noise Cancelling
Figure 4-1. Active Noise Cancelling function's image
NXDN™ IC-F5400D/IC-F6400D SERIES PRODUCT GUIDE
®
version 2.1+EDR, and the details of the
Application
Background noise is suppressed.
16
Voice