Device Address; Manufacturer; Device Type Identification; Device Revision - Siemens SITRANS LR560 Operating Instructions Manual

5.2. Device Address

Note:
The address can only be changed from a remote master such as NI-FBUS-
Configurator or DeltaV. See the manual
(7ML19985MP01)
Read only. The unique address of the device on the network.
Values

5.3. Manufacturer

Device manufacturer: Siemens.

5.4. Device Type Identification

Hexadecimal integer defined by Siemens to uniquely identify each product with
manufacturer's Id. (LR560 FF device= 00D7.)

5.5. Device Revision

Manufacturer's revision number associated with this device.

5.6. ITK Version

Major revision number of the interoperability test case used to register this device.

6. Security

Note: Default settings in the parameter tables are indicated with an asterisk (*) unless
explicitly stated.

6.1. Remote Access

6.1.1. Remote Lockout
Note: If remote lockout control is changed to limit remote access, it can be
reset only via the handheld programmer.
Enables or disables programming via the network and AMS Device Manager.
Options
7ML19985LY01
for more details.
Temporary range during initial commissioning: 248 - 251.
Permanent range after commissioning complete (written to non-
volatile memory in the device): 16-247
* OFF
ON
SITRANS LR560 (FF) – INSTRUCTION MANUAL
Foundation Fieldbus for Level instruments
Remote operation enabled
Remote operation disabled
Page 121