Siemens SITRANS LR560 Operating Instructions Manual page 99

2.3.6.2.
Defines the maximum rate at which the reported sensor value
to increase. Allows you to adjust the SITRANS LR560 response to increases
in the actual material level. Fill Rate is automatically updated whenever
Response Rate (2.3.6.1.) is altered.
Options
Related
parameters
Enter a value slightly greater than the maximum vessel-filling rate, in units
per minute.
2.3.6.3.
Defines the maximum rate at which the reported sensor value
to decrease. Adjusts the SITRANS LR560 response to decreases in the
actual material level. Empty Rate is automatically updated whenever
Response Rate (2.3.6.1.) is altered.
Options
Related
parameters
Enter a value slightly greater than the vessel's maximum emptying rate, in
units per minute.
1)
The value produced by the echo processing which represents the distance from sen-
sor reference point to the target (see Minimum Sensor Value (2.4.3.) on page 95 for an
illustration).
7ML19985LY01
Fill Rate/Min
Range: 0 to 999 999 m / min.
Response Rate (2.3.6.1.)
*
Level Unit (2.3.2.)
Empty rate/Min
Range: 0 to 999 999 m / min.
Response Rate (2.3.6.1.)
*
Level Unit (2.3.2.)
SITRANS LR560 (FF) – INSTRUCTION MANUAL
Slow 0. 1 m/min (0.32 ft/min)
Medium 1.0 m/min (3.28 ft/min)
Fast 10.0 m/min (32.8 ft/min)
Slow 0. 1 m/min (0.32 ft/min)
Medium 1.0 m/min (3.28 ft/min)
Fast 10.0 m/min (32.8 ft/min)
1)
is allowed
Fill Rate
1)
is allowed
Empty Rate
Page 93