Siemens SITRANS LR560 Operating Instructions Manual page 61

TVT Shaper 1
• Shaper breakpoints 1 to 40
TVT Shaper 2
• Shaper breakpoints 41 to 80
TVT Shaper 3
• Shaper breakpoints 81 to 120
Manual TVT-Curve
Note: Put LTB Block into OOS Mode before changing settings, then back into AUTO
mode to display TVT.
Displays the effects of the TVT shaper modifications. (Shaper Mode must be On.)
Navigate to Configure/Setup > LTB > Setup > Signal Processing > Manual TVT-Curve.
7ML19985LY01 SITRANS LR560 (FF) – INSTRUCTION MANUAL Page 55