Local Display Interface (Ldi); Versions; Applications; Approvals And Certificates - Siemens SITRANS LR560 Operating Instructions Manual

Local Display Interface (LDI)

• LDI may be ordered installed or added later as an
option
• can be mounted in 1 of 4 positions at 90 degree
intervals, for easy viewing after installation
• displays level and diagnostic information
including echo profile and trend over time
• backlit for easy viewing in dimly lit areas
• allows you to copy parameters from one device
to another
• provides high speed firmware transfer capabilities for future upgrades

Versions

Two different versions of the LR560 are available:
• 40 m range, 100 °C maximum process temperature
• 100 m range, 200 °C maximum process temperature

Applications

• cement powder, plastic powder/pellets, grain, flour, coal, and other applications
• solids bulk storage vessels

Approvals and Certificates

SITRANS LR560 is available with General Purpose or Hazardous approvals. For details
Approvals
see on page 10.
Application
Type
Non- General
hazardous Purpose
Non-Sparking/
Energy Limited
Dust Ignition
Hazardous
Proof
Non-incendive
7ML19985LY01
LR560
Approval Rating
Version
CSA , FM, CE, C-TICK
US/C
ATEX II 3G Ex nA/nL IIC T4 Gc
ATEX II 1D, 1/2D, 2D
IECEx SIR 09.0149X
Ex ta IIIC T139
FM/CSA:
Class II, Div. 1, Groups E, F, G
Class III T4
FM/CSA:
Class I, Div. 2, Groups A, B, C, D T4
SITRANS LR560 (FF) – OPERATING INSTRUCTIONS
o
C Da
Valid for: Wiring
N. America, See
Europe page 23
See
Europe
page 28
Europe and See
International page 28
See
US/Canada
page 28
See
US/Canada
page 28
Page 7