Siemens SITRANS LR560 Operating Instructions Manual page 75

XD Error
• Transducer Error
Block Alarm
Click on Block Alarm to open the dialog window to read the following:
Unacknowledged
• Unacknowledged
Alarm State
• Alarm State
Subcode
• Subcode
Value
• Value
1) From the Block Error tab, check the Maintenance window to display the level of
maintenance alarm that is active.
2) From the Block Alarm tab, check the Alarm State window to display the level of
maintenance alarm that has been acknowledged.
3) From the Block Alarm tab, in the Unacknowledged window, select Acknowledged to
acknowledge an alert.
Note: Acknowledging a maintenance reminder from the device [see Acknowledge
(4.2.9.), Acknowledge (4.3.9.), Acknowledge (4.4.9.), Acknowledge (4.5.9.)], will not set
the Block Alarm to
block alert, and the block alert can only be acknowledged via a remote host such as
NI-FBUS-Configurator or AMS Device Manager (as in step 3 above).
7ML19985LY01
Acknowledged
in AMS. The maintenance alarm will cause an FF
SITRANS LR560 (FF) – INSTRUCTION MANUAL Page 69