Device; Sensor - Siemens SITRANS LR560 Operating Instructions Manual

2.2. Device

2.2.1. Hardware Revision
Read only. Revision corresponding to the electronics hardware of the Field
Device.
2.2.2. Firmware Revision
Read only. Revision corresponding to the software or firmware that is
embedded in the LR560.
2.2.3. Loader Revision
Read only. Revision corresponding to the software used to update the LR560.
2.2.4. Manufacture Date
Read only. The date of manufacture of the SITRANS LR560. (Local display
format: YY-MM-DD hh:mm:ss)

2.3. Sensor

2.3.1. Unit
Sensor measurement unit.
Values
2.3.2. Level Unit
The engineering unit used for Level. High Level Point corresponds to High
Calibration Point (2.3.5.2.) and Low Level Point corresponds to Low Calibration
Point (2.3.5.1.).
High Level Point
(default: 100%)
Low Level Point
(default: 0%)
Options
2.3.3. Temperature Units
Selects the engineering unit to be displayed with the value representing
temperature.
Options
1)
The point on the sensor from which measurements are referenced (see
on page 12
).
Page 90 SITRANS LR560 (FF) – INSTRUCTION MANUAL
m, cm, mm, ft, in
Default: m
1)
m, cm, mm, ft, in, %
* %
K, DEGC, DEGF, DEGR
* DEG C
sensor
reference
High
point
Calibration
(flange face)
Point
Level
Low
Calibration
Point
1)
Dimensions
7ML19985LY01