Device Address; Application Examples - Siemens SITRANS L Operating Instructions Manual

Commissioning

6.3 Application examples

①
②
③
④
⑤
⑥
• Use UP
feature becomes active.
• To move a cross-hair, press RIGHT
decrease.
• To Zoom into an area, position the intersection of the cross-hairs at the center of that
area, select Zoom, and press RIGHT
• To update the profile, select Measure and press RIGHT
• To return to the previous menu, select Exit then press RIGHT
6.2.3.5

Device Address

Note
The address can only be changed from a remote master such as NI-FBUS Configurator or
DeltaV. See Addressing in manual Foundation Fieldbus for Level Instruments
(7ML19985MP01) for further details.
Read only. The unique address of the device on the network.
Values
• In PROGRAM mode, navigate to: Level Meter > Communication (5.) > Device Address
(5.2.) to view the device address.
• Press Mode
6.3 Application examples
Note
In the applications illustrated below, values are for example purposes only.
58
Confidence
Distance from Low Calibration Point to vertical cross-hair ⑧
Algorithm: tF (trueFirst)
Distance from flange face to target
Pan left/right - selected
Pan up/down
or DOWN arrow to scroll to an icon. When an icon is highlighted, that
Temporary range during initial commissioning: 248 - 251. Permanent range
after commissioning complete (written to non-volatile memory in the device):
16-247
to return to Measurement mode.
⑦
⑨
⑩
⑪
arrow to increase the value, LEFT
arrow. Press LEFT
arrow.
SITRANS LR250 with FOUNDATION FIELDBUS
Operating Instructions, 09/2021, A5E32221411-AH
Zoom
Measure
Exit
Exit icon selected
Exit icon deselected
arrow to
arrow to Zoom out.
arrow.