Siemens SITRANS LR560 Operating Instructions Manual page 139

Code
Meaning
/Icon
S: 31 Flash error.
S: 33 Factory calibration for the internal tem-
perature sensor has been lost.
S: 34 Factory calibration for the device has
been lost.
S:39 Transducer temperature sensor failure.
S:40 Transducer temperature too high.
S: 41 Transducer temperature too low.
S:64 Device error.
NOTE: Fault text and icon appear only
on LCD.
S:66 to Device error.
S:83 NOTE: Fault text and icons appear only
on LCD.
7ML19985LY01
General Fault Codes (cont'd)
SITRANS LR560 (FF) – INSTRUCTION MANUAL
Corrective Action
Repair required: contact your local
Siemens representative.
Repair required: contact your local
Siemens representative.
Repair required: contact your local
Siemens representative.
Repair required: contact your local
Siemens representative.
Relocate device and/or lower
process temperature enough to cool
device. Inspect for heat-related
damage and contact your local
Siemens representative if repair is
required.
Relocate device and/or raise process
temperature enough to warm device.
Inspect for temperature-related
damage and contact your local
Siemens representative if repair is
required.
Repair required. Contact your local
Siemens representative.
Repair required. Contact your local
Siemens representative.
Page 133