Analog way NATIX NTX8022A User Manual page 49

NATIX™
7-4. COMMANDS AND RESPONSES TABLE (continued)
ASCII
RESPONSE
COMMAND
COMMUNICATION PORT COMMANDS
ne LANE
nr LANR
ns LANS
na ADIP
nw IPA_
nx IPB_
ny IPC_
nz IPD_
np PORT
nk NTMK
nt TCP
OPTIONAL VIDEO OUTPUTS COMMANDS (available with the OPT-iX-SDTVD1 option)
kR SREQ
kT SSTA
kM SFAM
kQ SFRQ
kC SVCR
kA SAFK
kO SOVR
kD SSTD
kK SK_
kS SS_
kV SV_
kF SF_
kW SHPO
kX SVPO
kY SHSZ
kZ SVSZ
NOTE:
COMMAND
DESCRIPTION
Communication port selection
Reset of the LAN parameters.
Store the LAN parameters.
IP address and port selection (for
modification)
First byte of the address selected by the
na command.
Second byte of the address selected by
the na command.
Third byte of the address selected by
the na command.
Forth byte of the address selected by
the na command.
Number of the port (local or remote)
selected by the na command.
netmask.
protocol selection.
Input reference for the frame rate of the
video output.
Status of the frame rate reference.
Standard input signal of the reference.
Frame rate of the input reference (in
hundredth of Hz)
Input stability.
Anti-flicker level.
Under/overscan mode.
Output video standard
"SK" firmware version.
"SS" firmware version.
"SV" firmware version.
"SF" firmware version.
Horizontal position.
Vertical position.
Horizontal size.
Vertical position.
(M) = output 1.
(P) = output 2.
Chapter 7 : REMOTE CONTROL PROGRAMMER'S GUIDE (continued)
TYPE
MIN MAX
Rd/Wr 0 1 0 = RS232
Rd/Wr 0 1 1 = reset.
Rd/Wr 0 1 1 = store.
0 = all IP address / ports
1 = IP local address / local port
Rd/Wr 0 3
2 = IP remote address / remote port
3 = IP gateway address.
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 0 255
local port: 10000 to 10999.
Rd/Wr 0 65500
remote port: 0 to 65500.
Value = number of bit to 0 (from right).
example: 2
Rd/Wr 0 24
Rd/Wr 0 1 0 = UDP
Rd/W 0 8
0 = internal rate
1= input #1................... 8 = input #8.
0 8
Rd
Rd 0 29 Identical as IF command.
Rd 0 65535
Rd/W 0 1 0 = DVD
Rd/W 0 7
Rd/W 0 1 0 = underscan
0 = NTSC
Rd/W 0 1
2 = NTSC J
Rd 0 65535
Rd 0 65535
0 65535
Rd
Rd 0 65535
Rd/W 0 255
Rd/W 0 255
Rd/W 0 255
Rd/W 0 255
Rd/Wr = Read and write command.
Rd = Read only command.
VALUE
DESCRIPTION
1 = LAN
255.255.255.252
3 255.255.255.248
.............
8 255.255.255.0
.............
24 255.0.0.0
1 = TCP
1 = VCR
1 = overscan
1 = PAL
PAGE 49