Licence Plate Lamps - Fiat Fullback Single cab Owner's Manual

441
4. Remove each socket and bulb
assembly by turning it anticlockwise.
442
C. Tail and stop lamp Remove the bulb
from the socket by turning it
anticlockwise while pressing in.
D. Rear turn-signal lamp Remove the
bulb by pulling it out.
E. Rear fog lamp (driver's
side)*/Reversing lamp Remove the bulb
by pulling it out.
240
5. To install the bulb, perform the
removal steps in reverse.
When mounting the lamp unit, align the
pins (F) and clip (G) on the lamp unit
with the holes (H) in the body.
AHA102885
443

Licence plate lamps

1. Insert a straight blade (or minus)
screwdriver into the lamp assembly and
pry gently to remove it.
AHA102898
444
NOTE Wrap a piece of cloth around the
tip of the screwdriver in order to avoid
scratching the lens and the body.
2. Remove the socket and bulb
assembly together by turning it
anticlockwise, and then remove the
bulb by pulling out.
AHA102902
445
3. To install the bulb, perform the
removal steps in reverse.
NOTE When mounting the lamp unit,
put the hook (A) on the right side of the
lamp unit into the body first.
AHA102915
446
AHA102928
AHZ100639