Table of Contents
Advertisement
435
2. Remove the 3 screws (B) and
remove the lamp unit.
436
NOTE When unfastening the screws of
the fog lamp, be careful not to
mistakenly move the beam position
adjustment screw (C).
437
AHA102667
3. Turn the socket anticlockwise to
remove it.
438
AHA102670
D. Front fog lamp
E. Daytime running lamp
4. While holding down the tab, pull out
the bulb
439
AHZ101056
5. To install the bulb, perform the
removal steps in reverse
Rear combination lamps
1. Open the rear gate (refer to "Rear
gate").
2. Remove the screws (A) that hold the
lamp unit.
AA0112846
440
3. Move the lamp unit toward the rear
of the vehicle and remove the clips (B).
AA0103202
AHA102872
239
Advertisement
Table of Contents
