To Deactivate The Start&Stop System - Fiat Fullback Single cab Owner's Manual

NOTE In the following cases, the
engine will not restart automatically.
While the engine is stopped
automatically, "Start&Stop OFF" switch
is pressed to deactivate the
"Start&Stop " system.
Bonnet is open.
NOTE When the engine restarts
automatically, decrease in audio volume
may temporarily be experienced. This
does not indicate a malfunction.
NOTE While the engine is stopped
automatically, the air volume change of
the air conditioner may temporarily be
experienced. This does not indicate a
malfunction.
To deactivate
The Start&Stop system is automatically
activated when the ignition switch is
turned to the "ON" position or the
operation mode put in ON. You can
deactivate the system by pressing the
"Start&Stop OFF" switch.
When the Start&Stop system is
deactivated, the
turned on.
To reactivate the Start&Stop system,
press the "Start&Stop OFF" switch; the
indicator will turn off.
156
255
256
NOTE This indicator will also turn on for
indicator will be
a few seconds when the ignition switch
is turned to the "ON" position or the
operation mode put in ON.
If the
driving
If the
Start&Stop system is malfunctioning
and will not operate.
We recommend you to consult a Fiat
Dealership.
AHA106333
AHA106346
indicator lamp blinks while
indicator lamp blinks, the
IMPORTANT
102) If the vehicle will be stopped for a long
time or if you will leave the vehicle
unattended, stop the engine.
103) Observe the following precautions
when the engine is stopped automatically.
Otherwise, an unexpected accident might
occur when the engine restarts
automatically: do not depress the
accelerator pedal to race the engine while
the vehicle is stopped (regardless of
whether the engine is running or stopped).
Otherwise, an unexpected accident might
occur when the engine restarts
automatically; when the engine is
automatically stopped, do not attempt to
exit the vehicle. Because the engine
restarts automatically when the driver's
seat belt is unfastened or the driver's door
is opened, an unexpected accident might
occur when the vehicle starts moving; do
not move the gearshift lever to a position
other than the "N" (Neutral) position. If the
gearshift lever is moved to a position other
than the "N" (Neutral) position, the indicator
lamp/indicator display blinks and the buzzer
sounds. If the gearshift lever is returned to
the "N" (Neutral) position, the indicator
lamp stops blinking and the buzzer stops
sounding. The engine will not restart if the
gearshift lever is in a position other than the
"N" (Neutral) position.