Position Lamps - Fiat Fullback Single cab Owner's Manual

425
2. Disconnect the connector (A).
426
3. Remove the sealing cover (B).
427
AHZ100974
4. Unhook the spring (C) which secures
the bulb, and then remove the
headlamp bulb.
AHA102771
428
5. To install the bulb, perform the
removal steps in reverse.

Position lamps

1. When replacing the bulb on the left
side of the vehicle, remove the clip (A)
holding down the washer tank spout
and move the spout towards the rear of
the vehicle.
AHA102784
429
2. Turn the bulb socket anticlockwise to
remove it. And remove the bulb from
the socket by pulling out.
AHA102797
430
3. To install the bulb, perform the
removal steps in reverse.
AHA103967
AHA102801
237