Fiat Fullback Single cab Owner's Manual page 127

211
A. Connector
B. Lower anchorage
If your child restraint system has a
support leg, make sure that there is a
support leg at the stable position on the
floor. If your child restraint system with a
tether strap, perform the step 4 through
8.
If your child restraint system without a
tether strap, perform the step 8.
4. Drop the child restraint's tether strap
(C) down from the clearance between
the rear seatback and back panel trim.
212
AHA106434
5. Tip the armrest forward. Open the
two fasteners (D) that's located in the
space where the armrest are stowed.
213
6. Open the inner cover.
214
AHA106610
7. Put your hand in the opening of the
two fasteners, attach the tether strap
hook (E) to the tether anchorage (F),
and securely tighten the tether strap.
AHA106623
215
If it is difficult to latch the tether strap
hook, turn the hook sideways.
8. Push and pull the child restraint
system in all directions to be sure it is
firmly secured.
AHA106636
AHA106649
125