Fiat Fullback Single cab Owner's Manual page 216

Club cab
The tools are stored under the floor on
the left-hand side of the rear seat. The
jack, and jack handle are stored under
the floor on the right-hand side of the
rear seat.
1. Raise the seat cushion. Refer to
"Folding up the seat cushion (Club
cab)". Open the rear door. Refer to "To
open or close the rear door (Club cab)".
2. Open the lid.
371
3. Remove the securing band (A), and
then take out the tools (B) on the
left-hand side.
214
372
4. Remove the securing nut (C), and
then take out the jack (D) on the
right-hand side.
AHA104153
373
5. Remove the jack handle (E) from the
holder (F), and then take out the jack
handle on the right-hand side.
374
AHA104166
6. Reverse the removing procedure
when storing the tools, jack and jack
handle.
NOTE When stowing the jack handle,
align the coloured marking on the jack
handle with that on the holder, and fit
the jack in the holder.
Double cab
The tools, jack, and jack handle are
located behind the rear seat.
1. Tip forward the seatback of the rear
seat. (Refer to "Folding the seatback
forward (Double cab)".
AHA104179
2. Type 1: remove the wheel nut wrench
(A) from the holder (B), and take out the
wrench. Type 2: remove the securing
band (C), and then take out the tools
(D).
AHA104182