Rear Differential Lock Indicator Lamp - Fiat Fullback Single cab Owner's Manual

278
137)
The rear differential lock does not
operate when the drive mode-selector
is in "2H" position (Easy select 4WD),
"2H" or "4H" position (Super select
4WD II).
When the rear differential is locked with
the drive mode-selector in "4L" or "4H"
position (Easy select 4WD), "4LLc" or
"4HLc" position (Super select 4WD II)
changing the drive mode-selector to
"2H" position (Easy select 4WD), "2H"
or "4H" position (Super select 4WD II)
makes the rear differential unlock
automatically.

Rear differential lock indicator lamp

When the ignition switch is turned to
the "ON" position or the operation
mode is put in ON, the rear differential
lock indicator lamp (A) in the meter
cluster illuminates for a few seconds
then indicates the rear differential lock's
operating status (activated or deactivated).
279
AHA106072
280
The 2WD/4WD operation indicator
lamp also illuminates for a few seconds
when the ignition switch is turned to the
"ON" position or the operation mode is
put in ON. Refer to "2WD/4WD
operation indicator lamp". The status of
the rear differential lock (resulting from
depression of the rear differential lock
switch) is shown by blinking or steady
illumination of the rear differential lock
indicator lamp.
Rear differential lock
Operation
state of rear
differential
lock
Rear differential
lock
deactivated
AHA104980
Switching in
progress
Rear differential
lock activated
Blink
Illuminate
Remain off
AHA104993
The indicator lamp blinks while the rear
differential lock is being switched
between its activated and deactivated
conditions. When the switching
operation is complete, the indicator
lamp is either illuminated steadily or not
illuminated.
indicator lamp
Easy Super
select select
4WD 4WD II
175