Fiat Fullback Single cab Owner's Manual page 160

2WD models
Shift point
1st gear
2nd gear
3rd gear
4th gear
5th gear
6th gear
Vehicles with 6 M/T, use 6th gear
whenever vehicle speed allows, for
maximum fuel economy.
4WD models
Vehicles with Easy select 4WD
Shift point
2H, 4H
1st gear 30 km/h
2nd gear 60 km/h
3rd gear 100 km/h
4th gear 140 km/h
5th gear 185 km/h
6th gear 220 km/h
158
Vehicles with Super select 4WD II
Speed limit
Shift point
30 km/h
60 km/h
1st gear
100 km/h
2nd gear
140 km/h
3rd gear
185 km/h
4th gear
220 km/h
5th gear
6th gear
Use 6th gear whenever vehicle speed
allows, for maximum fuel economy.
Speed limit
227) Depress the clutch pedal fully to
4L
change gear correctly. It is therefore
10 km/h
essential that there is nothing under the
pedals: make sure the mats are lying flat
20 km/h
and do not get in the way of the pedals.
35 km/h
55 km/h
70 km/h
85 km/h
105) Do not put the gearshift lever into the
reverse position while the vehicle is moving
forward. Doing so could damage the
transmission.
106) Do not rest your foot on the clutch
pedal while driving as this will cause
premature clutch wear or damage.
Speed limit
2H, 4H 4L
30 km/h 10 km/h
60 km/h 25 km/h
100 km/h 40 km/h
145 km/h 55 km/h
190 km/h 70 km/h
225 km/h 85 km/h
WARNING
IMPORTANT
107) Do not coast in the "N" (Neutral)
position.
108) Do not use the gearshift lever as a
hand rest, because this can result in
premature wear of the transmission shift
forks.
109) Quick or slight clutch engagement
made while the engine is running at high
speed will cause damage to the clutch and
transmission because the tractive force is
very great.
110) Do not depress the gearshift lever
when moving it to any position other than
the "R" (Reverse) position. If you always
depress the gearshift lever when moving it,
you could unintentionally move the gearshift
lever to the "R" (Reverse) position and
cause an accident and/or a transmission
fault.