Output Setup; Fine-Tuning Examples; Under-Exposure - Banner ABR 3000 Series Instruction Manual

6.6 Output Setup

1. Configure your application-specific Digital Output(s) and Green/Red Spots (if used) from the Configuration
Parameters tree area: Output 1, Output 2, etc.
2. Save the configuration from temporary memory to permanent memory, overwriting the previously saved
configuration.

6.7 Fine-Tuning Examples

The following examples show some of the typical conditions occurring during the installation and how they can be tuned
manually.

6.7.1 Under-Exposure

To correct an under-exposure result it is recommended to change the following parameters in their order of appearance:
1. Increase the Exposure Time.
2. Increase the Gain.
Note: In general, a longer exposure time corresponds to a lighter image but is susceptible to blurring due
to code movement.
High gain settings may produce a grainy image that may affect the decoding process.
Figure 54. Output Setup
www.bannerengineering.com - Tel: + 1 888 373 6767
ABR 3000 Series Barcode Reader
43