Ethernet Interface; Tcnm-Acbb1 Electrical Connections - Banner ABR 3000 Series Instruction Manual

ABR 3000 Series Barcode Reader
Pin Name
1 TX +
2 RX +
3 TX -
4 RX -

3.7.6 Ethernet Interface

The Ethernet interface can be used for TCP/IP communication with a remote or local host computer by connecting the
reader to either a LAN or directly to a host PC. There is no need to use a crossover adapter since ABR incorporates an
auto-cross function.
A STP-M12D-4xx can be used to connect to a LAN.
On the ABR Ethernet interface the following communication channels are available:
• TCP Client
• TCP Server
• UDP Channel
• FTP Client
The following Industrial Ethernet protocols are also available over the Ethernet interface:
• EtherNet/IP
• Modbus TCP Client

3.8 TCNM-ACBB1 Electrical Connections

All ABR models can be connected to a TCNM-ACBB1 connection box through the MQDEC-1703SS-DB25 accessory cable.
This cable terminates in an M12 17- pin connector on the ABR side and in a 25-pin male D-sub connector on the TCNM-
ACBB1 side.
Make system connections through one of the TCNM-ACBB1 connection boxes because they offer the advantages of easy
connection, easy device replacement, opto-isolated outputs (Outputs 1 and 2), and filtered reference signals.
Use this pinout only when the ABR is connected to the TCNM-ACBB1 by means of the MQDEC-1703SS-DB25 accessory
cable.
When using a TCNM-ACBB1 with an ABR 3000:
• The Input setting Line Type must be set to PNP
• The Trigger and Input 2 indicator LED's are not functional in the TCNM-ACBB1 box
• Any input signals to the TCNM-ACBB1 must be PNP current sourcing signals
Vdc Power Supply Input Voltage +
GND Power Supply Input Voltage -
Earth Protection Earth Ground
+V Power Source – External Trigger
I1A External Trigger A (polarity insensitive)
I1B External Trigger B (polarity insensitive)
-V Power Reference – External Trigger
+V Power Source – Inputs
I2A Input 2 A (polarity insensitive)
I2B Input 2 B (polarity insensitive)
-V Power Reference – Inputs
20
Function
Transmitted data (+)
Received data (+)
Transmitted data (-)
Received data (-)
TCNM-ACBB1 Terminal Block Connectors
Input Power
Inputs
www.bannerengineering.com - Tel: + 1 888 373 6767