Digital Input Echo To Industrial Ethernet - Banner ABR 3000 Series Instruction Manual

3. Under Deactivation, select the same bit and set it to Trailing.
When the host turns on the ABR Input Bit, the ABR turns on its physical discrete Output 1.

8.1.5 Digital Input Echo to Industrial Ethernet

The Industrial Ethernet host controller can receive echoes of the Reading Phase and discrete digital Input signals from the
ABR as Output bits.
1. Go to Output Setup and select an Industrial Protocol Output Bit.
This example uses Output Bit 0.
2. Under Activation, select the discrete digital input to echo, leaving the bit polarity as Leading.
Figure 62. Industrial Ethernet Strings and Bits
www.bannerengineering.com - Tel: + 1 888 373 6767
ABR 3000 Series Barcode Reader
Industrial Ethernet Bits
51