Ethernet/Ip; Abr Assembly Object Descriptions - Banner ABR 3000 Series Instruction Manual

Hide thumbs Also See for ABR 3000 Series:
Table of Contents

Advertisement

3. Click on the relevant Industrial Protocol.
In this example, Message 2 has been linked to the EtherNet/IP Industrial Protocol. The data from Message 2 will be
sent, as an ASCII string, to the ABR Industrial Protocol output data registers. Arrows should be drawn automatically
from the messages to the Industrial Ethernet channel in the diagram in the center of the screen.

8.2 EtherNet/IP

If you are using a PLC programmed by Rockwell Studio 5000 Logix Designer software version 20 or later, such as the
ControlLogix or CompactLogix series, you should be able to skip to
Designer Software
on page 57 and configure your PLC using the EDS and AOI files. Users of other controllers may have

ABR Assembly Object Descriptions

more need of
Manager
on page 56.
8.2.1 ABR Assembly Object Descriptions
The ABR reader is controlled via EtherNet /IP using assembly objects. From the point of view of a PLC, there is one input
assembly and one output assembly
The Originator (client) of the EtherNet /IP connection is the PLC. The Target (AKA server) of the EtherNet /IP connection is
the ABR reader. The direction of communication can be described as T > O or O > T (sometimes also shown as T2O or
O2T). The following tables list the data contained in all of the ABR assembly instances.
Inputs to the Sensor (Outputs from the PLC)
PLC Assembly Instance 113 (0×71) - 3 Registers (Sensor Inputs/PLC Outputs) O > T
Data transfer direction: Originator (PLC) to Target (ABR). Assembly instance 113 is the data used to control the flow of result
message strings from the ABR and pass 8 discrete input bits for control options such as triggering image acquisitions.
WORD#
0
1
2
Figure 64. Data Formatting
Configuring the ABR for Ethernet/IP in Barcode
on page 53 and
WORD NAME
Last Item Sequence Number
Output Bits
Last Fragment Sequence Number
www.bannerengineering.com - Tel: + 1 888 373 6767
ABR 3000 Series Barcode Reader
ABR Series EDS File Installation in Studio 5000 Logix
DATA TYPE
8-bit integer
8-bit integer
8-bit integer
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Abr3106 seriesAbr3009 series

Table of Contents