Verifying The Msdp Configuration; Monitoring Msdp - Cisco Nexus 7000 Series Configuration Manual

Configuring MSDP
Step 4
Step 5

Verifying the MSDP Configuration

To display the MSDP configuration, perform one of the following tasks:
Command
show ip msdp count [as-number] [vrf vrf-name |
known-vrf-name | all]
show ip msdp mesh-group [ mesh-group] [ vrf
vrf-name | known-vrf-name | all]
show ip msdp peer [ peer-address] [vrf vrf-name |
known-vrf-name | all]
show ip msdp rpf [rp-address] [vrf vrf-name |
known-vrf-name | all]
show ip msdp sources [vrf vrf-name |
known-vrf-name | all]
show ip msdp summary [vrf vrf-name |
known-vrf-name | all]
For detailed information about the fields in the output from these commands, see Cisco Nexus 7000 Series
NX-OS Multicast Routing Command Reference.

Monitoring MSDP

You can display and clear MSDP statistics by using the features in this section.
Command or Action
switch(config)# ip msdp flush-routes
show running-configuration | include
flush-routes
Example:
switch(config)# show
running-configuration | include
flush-routes
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide

Verifying the MSDP Configuration

Purpose
(Optional) Shows flush-routes configuration
lines in the running configuration.
(Optional) Saves configuration changes.
Description
Displays MSDP (S, G) entry and group counts by the
AS number.
Displays the MSDP mesh group configuration.
Displays MSDP information for the MSDP peer.
Displays next-hop AS on the BGP path to an RP
address.
Displays the MSDP-learned sources and violations
of configured group limits.
Displays a summary of the MSDP peer configuration.
169