Configuring Multicast Interoperation with N7K-F132-15 Modules
Step 7
Example
This example shows how to specify certain physical interfaces on the N7K-M Series modules to
perform egress multicast replication for VLANs on the N7K-F132-15 module in a mixed chassis
and to trigger a rebalance:
switch# config t
switch(config)# hardware proxy layer-3 replication exclude interface ethernet 2/1-16, 3/1,
4/1-2
switch(config)# hardware proxy layer-3 replication rebalance mode manual
switch(config)# hardware proxy layer-3 replication trigger rebalance
switch(config)#
Verifying the Multicast Configuration
To display multicast configuration information, perform one of the following tasks:
Command
show hardware proxy layer-3 detail
show hardware proxy layer-3 counters {brief |
detail}
Feature History for Multicast Interoperation
Table 26: Feature History for Multicast Interoperation
Feature Name
Multicast interoperation between
F-Series and M-Series modules in
the Cisco Nexus 7000 Series
chassis
Command or Action
copy running-config startup-config
Example:
switch# copy running-config
startup-config
Releases
5.1(1)
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
Verifying the Multicast Configuration
Purpose
(Optional) Copies the running configuration to
the startup configuration.
Description
Displays information about the Layer 3 proxy routing
functionality in a mixed chassis with both M-series
and N7K-F132-15 modules.
Displays information about the number of packets
that are sent by the N7K-F132-15 modules to each of
the M-Series modules for proxy forwarding.
Note
Enter the clear hardware proxy layer-3
counters command to reset the counters
to 0.
Feature Information
This feature, along with the
N7K-F132-15 modules, was
introduced in this release.
193