Licensing Requirements For Msdp; Prerequisites For Msdp; Default Settings For Msdp - Cisco Nexus 7000 Series Configuration Manual

Licensing Requirements for MSDP

Licensing Requirements for MSDP

Product
Cisco NX-OS

Prerequisites for MSDP

MSDP has the following prerequisites:
• You are logged onto the device.
• You are in the correct virtual device context (VDC). A VDC is a logical representation of a set of system
• For global commands, you are in the correct virtual routing and forwarding (VRF) mode. The default
• You configured PIM for the networks where you want to configure MSDP.

Default Settings for MSDP

This table lists the default settings for the MSDP parameters.
Table 19: Default MSDP Parameters
Parameters
Description
Administrative shutdown
MD5 password
SA policy IN
SA policy OUT
SA limit
Originator interface name
Group limit
SA interval
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
160
resources. You can use the switchto vdc command with a VDC number.
configuration mode shown in the examples in this chapter applies to the default VRF.
License Requirement
MSDP requires an Enterprise Services license. For a
complete explanation of the Cisco NX-OS licensing
scheme and how to obtain and apply licenses, see the
Cisco NX-OS Licensing Guide.
Default
Peer has no description
Peer is enabled when it is defined
No MD5 password is enabled
All SA messages are received
All registered sources are sent in SA messages
No limit is defined
RP address of the local system
No group limit is defined
60 seconds
Configuring MSDP