Configuring Ssm (Pim6); Configuring Rpf Routes For Multicast - Cisco Nexus 7000 Series Configuration Manual

Configuring SSM (PIM6)

Step 3
Step 4
Configuring SSM (PIM6)
Before you begin
Ensure that you have installed the Enterprise Services license and enabled PIM6.
Procedure
Step 1
Step 2
Step 3
Step 4

Configuring RPF Routes for Multicast

You can define RPF routes for multicast when you want multicast data to diverge from the unicast traffic
path. You can define RPF routes for multicast on border routers to enable reverse path forwarding (RPF) to
an external network.
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
102
Command or Action
show ip pim group-range [ ip-prefix ] vrf
vrf-name | all ]
Example:
switch(config)# show ip pim group-range
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Command or Action
config t
Example:
switch# config t
switch(config)#
[no] ipv6 pim ssm range { ipv6-prefix | none
| route-map policy-name }
Example:
switch(config)# ipv6 pim ssm range
FF30::0/32
show ipv6 pim group-range [ ipv6-prefix ]
vrfvrf-name | all ]
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Configuring PIM and PIM6
Purpose
policy. If the keyword none is specified, resets
the SSM range to the default of 232.0.0.0/8.
(Optional) Displays PIM mode and group
ranges.
(Optional) Saves configuration changes.
Purpose
Enters global configuration mode.
Configures up to four group ranges to be treated
in SSM mode. You can specify a route-map
policy name that lists the group prefixes to use
with the match ip multicast command. If the
keyword none is specified, all group ranges are
removed. The default range is FF3x/96.
(Optional) Displays PIM6 modes and group
ranges.
(Optional) Saves configuration changes.