Configuring A Static Multicast Mac Address - Cisco Nexus 7000 Series Configuration Manual

Configuring a Static Multicast MAC Address

Step 6
Configuring a Static Multicast MAC Address
Beginning with Cisco Release 5.2(1) for the Nexus 7000 Series chassis, you can configure an outgoing interface
statically for a multicast MAC address.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
152
Command or Action
copy running-config startup-config
Example:
switch# copy running-config
startup-config
Command or Action
config t
Example:
switch# config t
switch(config)#
mac address-table multicast
multicast-mac-addr vlan vlan-id interface
slot/port
Example:
switch(config)# mac address-table
multicast 01:00:5f:00:00:00 vlan 5
interface ethernet 2/5
exit
Example:
switch(config)# exit
switch#
show ip igmp snooping mac-oif [detail | vlan
vlan-id [detail]]
Example:
switch# show feature-set
copy running-config startup-config
Example:
switch# copy running-config
startup-config
Configuring IGMP Snooping
Purpose
(Optional) Copies the running configuration to
the startup configuration.
Purpose
Enters global configuration mode.
Configures the specified outgoing interface
statically for a multicast MAC address.
Exits configuration and/or VLAN configuration
mode.
(Optional) Displays the IGMP snooping static
MAC addresses.
(Optional) Copies the running configuration to
the startup configuration.