Configuring Igmp Snooping Parameters Per Vlan - Cisco Nexus 7000 Series Configuration Manual

Configuring IGMP Snooping
Step 3

Configuring IGMP Snooping Parameters per VLAN

To affect the operation of the IGMP snooping process per VLAN, you can configure the optional IGMP
snooping parameters described in this table.
Parameter
IGMP snooping
Explicit tracking
Fast leave
Group timeout
Command or Action
Option
switch(config)# ip igmp snooping
report-suppression
ip igmp snooping max-gq-miss
count
switch(config)# ip igmp snooping
max-gq-miss 5
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
Configuring IGMP Snooping Parameters per VLAN
Purpose
Description
suppression and
proxy reporting.
The default is
disabled.
Configures the
maximum number
of general query
misses permitted.
The range is 3 to 5
queries. The default
is 3 queries.
(Optional) Saves configuration changes.
Description
Enables IGMP snooping on a per-VLAN basis. The
default is enabled.
If the global setting is disabled, all VLANs
Note
are treated as disabled, whether they are
enabled or not.
Tracks IGMPv3 membership reports from individual
hosts for each port on a per-VLAN basis. The default
is enabled.
Enables the software to remove the group state when
it receives an IGMP leave report without sending an
IGMP query message. This parameter is used for
IGMPv2 hosts when no more than one host is present
on each VLAN port. The default is disabled.
Configures the group membership timeout for the
specified VLANs.
137