Changing The Lookup Mode - Cisco Nexus 7000 Series Configuration Manual

Changing the Lookup Mode

Step 5
Changing the Lookup Mode
Beginning with Cisco Release 5.2(1) for the Nexus 7000 Series chassis, you can configure the lookup mode
to be based on the MAC address either globally or per VLAN.
Procedure
Step 1
Step 2
Cisco Nexus 7000 Series NX-OS Multicast Routing Configuration Guide
150
Command or Action
Option
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Command or Action
config t
Example:
switch# config t
switch(config)#
layer-2 multicast lookup mac
Example:
switch(config)# layer-2 multicast lookup
mac
Purpose
D e s c r i p t i o n
Note You must
configure
access-group
(policy
filter), for
this
command to
function
correctly.
(Optional) Saves configuration changes.
Purpose
Enters global configuration mode.
Globally changes the lookup mode to be based
on the MAC address. To return to the default
IP lookup mode, use the no form of this
command.
Configuring IGMP Snooping