Instructions For Use - Otto Bock 12K41 Instructions For Use Manual

Mounting the elbow joint
Carefully push the elbow joint back onto the forearm.
Apply one drop of Loctite 243 to the two elbow joint attach-
ment screws and tighten them evenly.
Attention:
Make sure you extend the arm!
Press both joint covers into place.
12K41
Fix the flexion cable within the marked area.
Attention!
When fixing the flexion cable, make sure the slack end part
does not penetrate the interior of the socket and thereby
damages sensible system components.
We recommend following one of the two fixing examples
seen in the pictures above.
When using the clamp stopple, use the 21A207 Clamp
Stopple Set and proceed according to the 647G231 In-
structions for Use.
21A207 Clamp Stopple Set
Mounting the elbow joint
Ottobock | 13